Dust-free clean room refers to the removal of air pollutants such as dust particles, hazardous gases, and germs in the air within a certain indoor space, and the temperature, environmental humidity, cleanliness level, working pressure and cyclone speed in the room Cyclone, noise, vibration, lighting, and electrostatic induction control are within a certain range of requirements, and the room is given especially the design plan.

The following describes the temperature detection of the purification workshop.

The cleaning work should be divided into raster data of equal total area, and the total area of each division should not exceed 100 square meters or it should be clearly discussed with the infrastructure construction party. Each grid measurement point should be above one measurement point, and each house measurement point should not be less than two. . The detection aspect ratio should be the height-width ratio of the work surface, and the distance from the decoration ceiling, wall and road surface should not be less than 300mm, and the hazards of pyrogens should be considered. The accurate measurement time should be no less than 1H and no less than 6min. Measure once, and record after the reading is stable. The measurement points for general temperature detection in the purification workshop, one measurement point for each temperature control area or each room, the aspect ratio of the test case should be the aspect ratio of the work surface, and the precise measurement time should be no less than 1H and no less than 6min Make an accurate measurement once, and make a record after the reading is stable.